Kegco Digital Javarator Cold-Brew Coffee Dispenser - Black Cabinet with Black Stainless Steel Door ICK30X-1
The Kegco ICK30X-1 Digital Javarator adds digital functionality and a wider available temperature range to your cold-brew coffee dispense systems. Now you have the ability to see your specific temperature setting and set it easily with the push of a button, in addition to having a wider available temperature range for more precise temperature control. This Javarator comes complete with everything you need to dispense cornelius kegs of iced coffee, making it even more convenient - and more fun! - to store, refrigerate, and dispense a refreshing glass of chilled coffee.
The Kegco ICK30X series has been designed with a matte black cabinet and a sleek black stainless steel door for a modern look that complements any decor. Black stainless steel is a unique black-graphite tone that resists more smudges, fingerprints, water spots, and streaks than standard stainless steel. Most stainless steel surfaces do not have a fingerprint-resistant finish and will need special polish to keep them looking new. Black stainless steel can be easily cleaned without requiring any special polish - simply clean with a damp cloth followed by a soft towel.
Digital Temperature Control
Changing temperature has never been easier thanks to the digital temperature controls found on the ICK30X series. With its digital temperature display and push button controls, you can easily set and verify the internal temperature of the cold brew coffee dispenser. You no longer have to guess what temperature a number on a dial will produce - simply press the up or down button to adjust the temperature by one degree. The display can be set to either Fahrenheit or Celsius.
Wide Enough Temperature Range to Dispense or Ferment
The ICK30 series features Fan-Forced cooling, giving them the coldest temperature range of any coffee keg cooler on the market today. The fan helps provide even cooling throughout the unit, and the temperature can be set as low as 32 degrees to dispense ice cold coffee.
The interior is spacious enough to easily hold up to two 5 Gallon D System kegs or up to three 5 Gallon Cornelius Ball Lock Home Brew Coffee Kegs, allowing you to store or dispense more than one variety of cold-brewed coffee at a time.
Deep Chill Function
The Deep Chill function allows you to quickly cool down a warm keg by forcing the compressor to work continuously for 24 hours. When your keg has reached the desired temperature, press Deep Chill again to return to normal operation.*
Converts to a Refrigerator with 2 Shelves
This Javarator does more than just dispense delicious coffee... it also easily converts into a refrigerator for extra storage! It comes with 2 adjustable shelves that can be spaced far enough apart to hold 2-liter bottles or gallon jugs. With the wide temperature range available in the ICK30, you can even use it to store wine!
Locking Casters Provide Mobility
Easily move the Kegco ICK30 from the kitchen to the patio for that backyard BBQ! Easy-Roll Casters allow you to move the Javarator from one location to another, and they lock so that once it's in position, it won't roll away again until you want it to.
The Kegco ICK30X-1 is designed for home use, so it is quiet and energy efficient. The removable recessed drip tray with a plastic grill can easily be taken out and cleaned in the dishwasher. The attractive chrome safety rail helps to keep mugs and glasses from sliding off, and installs with ease. This Iced Coffee Kegerator includes a draft tower with a stainless steel faucet and fittings to ensure a sanitary environment for your cold brewed coffee. Also included are a set of ball lock keg couplers for cornelius home brew kegs, a dual gauge nitrogen regulator, and a 22 cu. ft. nitrogen tank. One 22 cu. ft. tank can pressurize up to fourteen 5-gallon kegs before needing to be refilled.
* - Letting the Deep Chill function run for the full 24 hours may result in freezing of the keg.
- MDK-309X-01 Refrigerator with Single Faucet Coffee Dispense System
Includes a brand new 22 cu. ft. Aluminum Nitrogen Tank
This Tank is produced from high strength aluminum alloy 6061-T6. This is superior to a steel tank because it will not rust. The service pressure is up to 2216 PSI/153 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 580 Valves are CGA approved, and have a female thread for Nitrogen Regulators. Average fill good for up to fourteen 5-gallon kegs depending upon your fill. (5.5" diameter, 18.5" Height).
Includes a Commercial Grade Dual Gauge Nitrogen Regulator
This commercial grade dual gauge regulator is compatible with nitrogen cylinders with CGA 580 valves and features a double gauge design that measures both PSI and the volume of nitrogen gas in the tank. The durable regulator body is constructed of forged brass with all brass connections and components, an integral safety pressure relief valve that releases at 45 PSI, and a shut-off valve that allows you to instantly shut off pressure to the keg. A large pressure adjustment knob makes it easy to adjust the pressure by hand without requiring a screwdriver.
Includes 5 feet of 5/16 Inch I.D. Blue Air Line Assembly with 2 Snap Clamps
The standard length is 5 feet of 5/16" I.D. Blue Air/Nitrogen Tubing made of Thermoplastic Vinyl Hose (Super Vinyl). This tubing will not rot, swell or dry out and is unaffected by normal cleaning compounds. This air line assembly comes with two Plastic Snap Clamps with a reusable clamp design.
Includes Ball Lock Home Brew Keg Couplers
This set includes both a gas in and beer out coupler that works with a ball lock Cornelius pepsi kegs. The Gas in features a 1/4" thread for a flare fitting. This connector already has attached the special 1/4" nut that has a 5/16" hose barb attached. The couplers are made of food grade plastic which will not corrode. There is an option to upgrade to all stainless steel ball lock couplers.
Includes a 3" Diameter Stainless Steel Draft Tower
The Tower is a commercial grade Single Column, Single Faucet, 3" Diameter, Stainless Steel Draft Tower with 100% Stainless Steel contact. The stainless steel contact is necessary for good sanitation. This tower comes complete with a stainless steel faucet and 5 Feet of 3/16 Inch I.D. Clear Tubing. This Tower is mounted using the gasket and four screws that are included. The faucet can be upgraded to a Perlick faucet, which has less internal surface area and prevents the faucet knob from sticking.
- All dispensing accessories are UL recognized components
- Converts to refrigerator 2 full-width wire shelves
- Matte Black cabinet and Black Stainless Steel door
- Digital temperature control keeps temperature in range of 32°F-75°F
- Maximum Ambient Temperature: 100 degrees Fahrenheit
- Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
- Deep Chill function to quickly cool down warm keg
- Easy roll casters for mobility
- Removable built-in drip tray with grill to collect spills
- Chrome guard rail to protect your mugs and glasses from sliding off
- Stainless steel interior floor mat for long lasting durability and easy glide of beer keg
- Plugs into standard home outlet
- 25% more energy efficient design saves you money each month!
- UL Listed
- Includes a brand new 22 cu. ft. Aluminum Nitrogen Tank
|Compressor (Parts Only)||5 Year|
|Keg Coupler||Ball Lock|
|CO2 Tank||5 lb|
|Cleaning Kit||Not Included|
|Keg Storage Capacities|
|Full Size / 1/2-Barrel||1|
|Pony Size / 1/4-Barrel||1|
|5 gal. Ball/Pin Lock Keg||3|
|Draft Beer Tower|
|Number of Faucets||1|
|Color / Material||Black Stainless Steel|
|Number of Doors||1|
|Accepts Custom Overlay Panel||No|
|Electrical Requirements||115 V / 60 Hz|
|Running Amps||1.7 A|