Kegco 15" Wide Built In Kegerator with Stainless Steel Door
Enjoy ice-cold beer on tap without taking up a ton of space in your home with the new Kegco VSK15-SSRN Kegerator! This durably built beer dispenser is designed with a slim 15" width which allows it to be built in undercounter in a very thin footprint - the perfect option to replace that old trash compactor you're not using anymore! Not only will it look great, thanks to it's attractive brushed stainless steel door with lock, but it's powerful compressor will do a great job maintaining the proper temperature for your beer and fan-forced cooling will push cold air up into the beer tower to keep every drop cold.
A cool blue LED lighting panel illuminates the contents of the kegerator, making it easy to adjust your CO2 pressure or configure your keg coupler. The low-heat lights do little to affect the temperature inside the beer referigerator.
Easily set and monitor your internal temperature at the push of a button! The intuitive control panel allows you to turn the light on and off, change the temperature from Fahrenheit to Celsius and adjust the temeprature in 1 degree increments.
Fits Quarter Slim Keg
Even with it's slim, space-saving design, this keg cooler can house up to a 7.75 gallon quarter slim keg. It also works equally well with 5 gallon Sankey kegs or 5 gallon ball lock home brew kegs, so you'll be sure to find a beer you enjoy!
Customizable Dispense Kit
Beverage Factory gives you the ability to configure the dispense kit to your liking. Choose your tower height, faucet type, keg coupler setup, regulator configuration and much more! Add a cleaning kit, faucet locks or customizable tap handles. Make your beer dispenser truly unique.
Wide Temperature Range
The Kegco VSK-15SSRN boasts the widest temperature range available on the market. Dispense your beer at an ice-cold 32°F or turn the temperature up high enough to use the cabinet as a fermentation chamber. With an adjustable range of 32-75°F, you're sure to find the setting that suits your tastes.
Includes a brand new 5 lb. Aluminum Co2 Tank
This Tank is produced from high strength aluminum alloy 6061-T6. This is superior to a steel tank because it will not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cyldiners are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators. Average fill good for 5-6 Kegs depending upon your fill. (5.5" diameter, 18.25" Height).
Includes Single Gauge Co2 Regulator
This Regulator works with any Co2 Tank with a CGA-320 valve. The single gauge measures PSI indicating how much Co2 pressure is inside the keg. Adjustable output pressure 0-60 psi. 3000 psig Max Primary Inlet. 60 psig Safety Relief Valve R82. Female CGA-320 connection. Ball valve outlet w/ 5/16" OD Hose Barb connection. Total ports = (2) Primary 1/4" FNPT ports, (2) Secondary 1/4" FNPT ports. UL Listed, Compressed Gas Regulator - for use w/ Air, Co2 and Inert Gases.
Includes 5 feet of 5/16 Inch I.D. Blue Air Line Assembly with 2 Snap Clamps
The standard length is 5 feet of 5/16" I.D. Blue Air/Co2 Tubing made of Thermoplastic Vinyl Hose (Super Vinyl). This tubing will not rot, swell or dry out and is unaffected by normal cleaning compounds. This air line assembly comes with two Plastic Snap Clamps with a reusable clamp design.
Includes D system Lever Handle Keg Coupler which can Tap all Domestic Kegs
This is a Commercial Grade Lever Handle Keg Coupler that works with all American "D" System Sankey Kegs. This coupler features a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg all you have to do is pull out and then down on the lever handle to properly couple the keg. An elbow fitting is provided to that the beer line can come off the coupler at a 90 degree angle so that it won't get kinked. This Keg Coupler can be swapped out to a Home Brew Coupler for no additional cost.
Includes a 3" Diameter Chrome Plated Metal Draft Tower
The Tower is a commercial grade Single Column, Single Faucet, 3" Diameter, Chrome Plated Metal Draft Tower. This Tower comes complete with a chrome plated faucet with brass lever and 5 Feet of 3/16 Inch I.D. Clear Beer Tubing that ends in a Nozzle & Hex Nut Assembly that connects to all standard keg couplers. This Tower is mounted using the gasket and four screws that are included.
Includes a 12" x 5" Stainless Steel Drip Tray
This beautiful brushed stainless steel drip tray will help keep ypur kegerator or counter top clean. The removable grill easily comes out for cleaning and the drip tray is dishwasher safe. We offer the option to upgrade to a 12 " x 5" drip tray with a drain or a 12" x 7" drip tray with a cut-out that fits around the base of the draft tower.
- All dispensing accessories are UL recognized components
- Matte black cabinet with stainless steel door
- Digital temperature control keeps temperature in range of 32°F-75°F (cold enough to dispense and warm enough to ferment)
- Maximum Ambient Temperature: 90 degrees Fahrenheit
- Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
- Fan-forced cooling provides even temperatures throughout the cabinet and helps with quick temperature pulldown on a warm keg
- Blower hose direct cold air into the draft beer tower so every drop is kept cool
- Tower extension is provided to bridge the gap between the top of the kegerator and the bottom of the countertop in undercounter applications
- LED interior lighting
- Security lock
- Includes both Towel Bar and Curved door handles so you can choose the version that best matches your decor
- Stainless steel interior floor mat for long lasting durability and easy glide of beer keg
- A perfect option for dispensing beer, soda, kombucha or wine
- 25% more energy efficient design saves you money each month!
- Plugs into standard home outlet
This kegerator can fit one Quarter Slim Keg, one 5 gallon commercial keg or one 5 gallon home brew keg.
|Depth||23 3/4" (25 1/4" w/ handle)|
|Shipping Weight||175 lbs.|
|Compressor (Parts Only)||5 Years|
|Keg Coupler||D system|
|Keg Storage Capacities|
|Full Size / 1/2-Barrel||0|
|Pony Size / 1/4-Barrel||0|
|5 gal. Ball/Pin Lock Keg||1|
|Draft Beer Tower|
|Number of Faucets||1|
|Color / Material||Stainless|
|Number of Doors||1|
|Door Handle||Towel Bar or Curved|
|Accepts Custom Overlay Panel||No|
|Electrical Requirements||115 V / 60Hz|